Fipermark | Egytronics
Fipermark / Epilog
Model: Epilog FiberMark 24
Engraving Area: 24" x 12"
Laser Wattage:
20, 30, or 50 watts
Weight:
120 lbs (55 kg) without stand

Features:

Our Fiber Laser Series are truly a unique products in the metal and plastic marking industry. The combination of flying-optic design and the highest quality engraving results provide a one-of-a-kind solution for your metal marking and engraving needs.

- High-Speed Parts Marking Over a Larger Work Area
Flying-optic beam delivery system provides a larger work area than in traditional metal marking systems.

- Open Architecture Software Interface:
Send projects to the laser through a simple print driver, allowing you to use the software you choose.

- Non-Contact Marking: No Bits Needed:
No need to brace parts or replace expensive engraving bits or tools

- Etch, Polish and Anneal with One System:
Create multiple marks that fit your needs with easy-to-use settings.

- Network the Laser Across Your Business:
Communicate with your laser through Ethernet, USB or even wirelessly.

- High Volume, Multi-Piece Marking:
Easy-access, drop-down door allows for easy access to the engraving table.

- Mark and Etch a Wide Variety of Materials:
Etch almost any metal and mark many engineered plastics.

Epilog FiperMark 24 Series Technical Specifications

Engraving Area 24" x 12" (610 x 305 mm)
Focal Length (F-Theta Lens) 3" (76.2 mm)
Maximum Material Thickness 5" (127 mm)
Laser Wattage 20, 30, or 50 watts
Laser Type Solid State Pulsed Ytterbium Fiber Laser (air cooled).
Mode of Operation Pulsed 20-80 kHZ.
Repetition Rate (Frequency) 20 kHZ - 100 kHz depending on the laser wattage.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
Air Assist Attach the included air compressor to our Air Assist to remove heat and combustible gases from the marking surface by directing a constant stream of compressed air across the marking surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's Fiber Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (FM Fusion) with the convenient Movable Home Position features on the FiberMark Laser.
Operating Modes Raster, vector or combined modes.
Motion Control System High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel long-lasting bearing system. Self lubricating on the Fusion M2
Belts Advanced B-style Kevlar belts.
Resolution User controlled from 75 to 1200 dpi
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
Size (W x D x H) 34.5" x 24.5" x 16" (876 x 622 x 406 mm).
Weight 120 lbs (55 kg)without stand
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight 200 lbs (90 kg) for static and 80 lbs
(36 kg) for lifiting.
Ventilation System External exhaust or internal filtration system is required via single 4" (101.6 mm) output port.

"Stainless Steel, Anodized Aluminum, Brass, Engineered Plastic,Titanium,..and more"