Fipermark fusion | Egytronics
Fipermark Fusion / Epilog
Epilog FiberMark Fusion 32 / 40
Engraving Area:
(812 x 508 mm) / (1016 x 711 mm)
Laser Tube Wattages:
20, 30, or 50 watts


Our Fiber Laser Series are truly a unique products in the metal and plastic marking industry. The combination of flying-optic design and the highest quality engraving results provide a one-of-a-kind solution for your metal marking and engraving needs.

- High-Speed Parts Marking Over a Larger Work Area
Flying-optic beam delivery system provides a larger work area than in traditional metal marking systems.

- Open Architecture Software Interface:
Send projects to the laser through a simple print driver, allowing you to use the software you choose.

- Non-Contact Marking: No Bits Needed:
No need to brace parts or replace expensive engraving bits or tools

- Etch, Polish and Anneal with One System:
Create multiple marks that fit your needs with easy-to-use settings.

- Network the Laser Across Your Business:
Communicate with your laser through Ethernet, USB or even wirelessly.

- High Volume, Multi-Piece Marking:
Easy-access, drop-down door allows for easy access to the engraving table.

- Mark and Etch a Wide Variety of Materials:
Etch almost any metal and mark many engineered plastics.

Epilog FiperMark Fusion M2 Series Technical Specifications

Epilog FiberMark Fusion M2 32 Epilog FiberMark Fusion M2 40
Engraving Area 32" x 20" (812 x 508 mm) 40" x 28" (1016 x 711 mm)
Focal Length (F-Theta Lens) 3" (76.2 mm) 3" (76.2 mm)
Maximum Material Thickness 12.5" (317 mm) 12.25" (311 mm)
Laser Wattage 20, 30, or 50 watts
Laser Type Solid State Pulsed Ytterbium Fiber Laser (air cooled).
Mode of Operation Pulsed 20-80 kHZ.
Repetition Rate (Frequency) 20 kHZ - 100 kHz depending on the laser wattage.
Intelligent Memory Capacity Multiple file storage up to 128 MB.
Air Assist Attach an air compressor to remove heat and combustible gases from the surface by directing a stream of air across the marking surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's Fiber Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand (FM 24) or joystick (FM Fusion) with the convenient Movable Home Position features on the FiberMark Laser.
Operating Modes Raster, vector or combined modes.
Motion Control System High-speed, continuous-loop, DC servomotors using linear and rotary encoding technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel long-lasting bearing system. Self lubricating on the Fusion M2
Belts Double-wide Kevlar (x-axis) and Steel Cord (y-axis) belts
Resolution User controlled from 75 to 1200 dpi
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Raster and vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
Size (W x D x H) 52.5" x 33.75" x 40.75"(1334 x 857 x 1035 mm)
37.75" (959 mm) deep with exhaust plenum.
60.5" x 41.25" x 42.25" (1537 x 1048 x 1073 mm)
43" (1092 mm) deep with exhaust plenum.
Weight 500 lbs (227 kg) 643 lbs (292 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.
Ventilation System External exhaust or internal filtration system is required via two 4" (101.6 mm) output ports.

"Stainless Steel, Anodized Aluminum, Brass, Engineered Plastic,Titanium,..and more"