|Model: Epilog Fusion M2|
(812 x 508 mm) / (1016 x 711 mm)
|Laser Tube Wattages:
|Weight: (227 kg) / (292 kg)|
Higher-Quality Components that Make Up the Fusion Laser Series.
Epilog strives to provide the best of what's most important to our users - image quality, speed, reliability, and ease of use. By utilizing only the highest-quality components, Epilog Laser systems are known worldwide for their reliability and performance, which translates into less down time and more profits for you.
|Epilog Fusion M2 32||Epilog Fusion M2 40|
|Engraving Area||32" x 20" (812 x 508 mm)||40" x 28" (1016 x 711 mm)|
|Maximum Material Thickness||13.25" (336 mm)||13.25" (336 mm)|
|Laser Wattage||CO2: 30, 40, 50, 60, 75 or 120 watts
Fiber: 20, 30, or 50 watts
Dual source: CO2 50, 60, or 75 watts
Fiber 20, 30, or 50 watts
|30, 40, 50, 60, 75 or 120 watts|
|Laser Source||State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.|
|Intelligent Memory Capacity||Multiple file storage up to 128 MB.|
|Air Assist||Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.|
|Laser Dashboard||The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.|
|Red Dot Pointer||Since the laser beam is invisible, the Red Dot Pointer on the Fusion Laser allows you to have a visual reference for locating where the laser will fire.|
|Relocatable Home||When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Fusion Series Lasers.|
|Operating Modes||Optimized raster, vector or combined modes.|
|Motion Control System||High-speed Brushless DC Servo Motors.|
|X-Axis Bearings||Ground and polished stainless steel Long-Lasting Bearing System.|
|Belts||Kevlar (x-axis) and Steel Cord (y-axis) belts.|
|Resolution||User controlled from 75 to 1200 dpi.|
|Speed and Power Control||Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.|
|Print Interface||10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.|
|Size (W x D x H)||52.5" x 33.75" x 40.75" (1334 x 857 x 1035 mm)
37.75" (959 mm) deep with exhaust plenum.
|60.5" x 41.25" x 42.25" (1537 x 1048 x 1073 mm)
43" (1092 mm) deep with exhaust plenum.
|Weight||500 lbs (227 kg)||643 lbs (292 kg)|
|Electrical Requirements||Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.|
|Maximum Table Weight||Fusion 32/40: 200 lbs (90 kg) for static and 100 lbs (46 kg) for lifting.|
|Ventilation System||650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter.||650 CFM (1104 m3/hr) external exhaust to the outside or internal filtration system is required. There are two output ports, 4" (102 mm) in diameter.|
"Wood, Glass, plastic, rubber, Leather,..and more"